Reliance Industries Limited
HDPE Pipes & Fittings
Application of HDPE Pipes.
WATER SUPPLY
- Raw/filtered water rising/gravity mains with distribution network.
- Demineralized water lines.
- Lift irrigation & siphon irrigation.
- Cooling/Chilled water circulation lines.
- Temporary construction water lines schemes for draught relief and flood relief.
- Agriculture applications like farm irrigation under ground or above ground piping network, sprinkler system, drip systems. Suction & delivery for jet pumps, submersible and centrifugal pumps.
EFFLUENT COLLECTION AND DISPOSAL SYSTEM
- Effluents
- Industrial pollution for safe disposal of chemicals in the sea.
GAS DISRIBUTION
- Natural gas, bio gas, sewage gas, etc
CHEMICAL AND EDIBLE TRANSPORT
- Acids/ alkalies (diluted or concentrated) like sulphuric acid, phosphoric acid, hydrochloric acid, fluoric acid, aromatic acid, caustic soda conveyance (pH 0 to 14).
- Edible oils, juices, pulp, salts, alcohol/beer.
SLURRY TRANSPORTATION
- Hydro transportation of solids like sand slurry, iron/tin ore slurry, iron ore tailing slurry, coal slurry, cement slurry, fly ash and boiler ash as slurry.
- Conveyance of Mud/Sand slurry for Dredging Applications.
SUBMARINE AND UNDERWATER PIPELINE
- Submarine and underwater pipeline for carrying potable water/effluent disposal in to the sea
DUST SUPRESSION SYSTEMS
- Dust suppression system for haul road, mineral loading platform, mineral handling plant, stock piles.
Salient Features of HDPE Pipes
- Light Weight The inherent light weight of HDPE pipes provides many cost saving benefits related to handling, storage, hauling , joining and installation.
- Tough & Strong HDPE pipes are strong as well as resilient to withstand both internal pressure as well as external loads (soil/traffic). Excellent even during water hammer condition to absorb surge pressure as well as thermal stresses.
- Flexibility Extremely flexible and coilable pipes available in continuous lengths of 50 mtrs. Up to 300 mtrs. In coil length for sizes 16 mm to 110mm OD. Pipes can be laid on undulating lands with maximum radius of curvature/bending up to 25 times of diameter (OD).
- Quick and Easy Jointing. The butt welding jointing technique provides absolutely leak-proof joint . Being available in coils up to a certain diameter, the quick and easy installation is possible.
- Other salient features of HDPE piping system over other systems includes no cathodic protection, very less maintenance, easy repair & cleaning if required, availability of wide range of fittings and provision for jointing with other piping systems etc.
- Smooth internal Surface By virtue of being extremely smooth oth internal surface it offers considerably low frictional resistance ance to the flowing medium C factor for HDPE pipes is minimum150 and remains constant all throughout its anticipated life.
- Resistance to Chemicals Totally inert to chemicals from ph-O-14 for almost all fluids (acid/alkali) thereby making it compatible to use even in the most hostile environmental conditions.
- Wear and Abrasion Resistance. HDPE pipes have excellent resistance to wear/abrasion. HDPE pipes have replaced conventional pipes in slurry-transport systems with excellent performance in flowing even with highly abrasive slurries like iron ore, sand, fly ash etc.
- Wide range of Choice HDPE pipes available in sizes from 16mm OD to 710 mm OD and are available in 2.5 kg/cm2 to 16b kg /cm2 pressure classes providing a wide option to the designer for optimization of cost.
Product Details
- HDPE PIPE SIZES : 16 mm to 710 mm OD.
- PRESSURE CLASS : 2.5 Kg/Cm2 to 16 Kg/Cm2
- GRADES : PE-63, PE-80 & PE-100
- HDPE PIPE FITTINGS : Tee, Bend, Pipe End, Reducer, End Cap,Slipon Flange.
- OTHER ACCESSORIES : Irrigation Sprinklers, Dust Suppression Sprinklers, Fog Nozzles, Clamp Saddles & Compression Fittings.
- JOINTING METHODS: Fusion / Welding Joints, Flange Joints, Quick Release Coupler Joints, Compression Fitting Joints, Inserted Transition Joints.
- STANDARDS : IS-4984, IS-14333, IS-14151, ISO-4427, ISO-4437, DIN-8074